管家婆22422论坛
logo.jpg 管家婆22422论坛
EN 中文

24 hours Hotline

400-6352-668

管家婆22422论坛
管家婆22422论坛

TS-3C Single-Component Water Curing Polyurethane Waterproofing Paint

Product overview

Single-Component Water curing Polyurethane Waterproofing Paint is a waterproof coating with water as curing agent. The product uses water as a crosslinking curing agent. When it is used, it only needs to add water and stir evenly,then curing as coating film, easy to use.

Order Hotline:400-6352-668

Advantages

* Excellent extension performance, high tensile strength, high and low temperature resistance, aging resistance and corrosion resistance.
* High solid content and large film forming rate.
* Suitable for drinking water projects, meet the requirements of environmental protection.
* All kinds of colors can be made by adding pigments to meet customers' needs and achieve waterproof decoration effect.

Application Range

* Waterproofing of buildings with high environmental protection requirements in schools, hospitals and other places
* Waterproofing of drinking water engineering, swimming pools, Irrigation and water conservancy project.
* Waterproofing of buildings in flammable and explosive places.

Executive Standard GB/T 19250-2013

Key points of construction

* The base surface should be clean, no sundries, no oil stain, solid, no sand and crack should be repaired first, the angle of the Yin and Yang need to be made into a circular arc.
* Materials preparation: mix the paint evenly before use, then add 8% clean water (heating water in cold weather) and mix evenly.
* It can be constructed by the method of scraping or mechanical spraying. The plane waterproof project can be coated with one time and reach the required thickness. The facade waterproof project needs to be coated with a very thin coating first to prevent the flow from hanging, then be coated to the get the required thickness.
* If need the scraping of second time, you need to wait until the upper coating is completely cured (about 24hours later).
* Paving protective coating or finishing material need to wait until the coating is completely cured. In construction, the sharp material should be prevented from scratching the coating.

Storage & Packaging

* When storage and transportation, different products need to be classified. Prevent approaching fire sources, avoid sun and rain, and prevent collisions.
* The product should be stored in a cool and ventilated place with a storage temperature of 5-40℃.
* Under normal storage and transportation conditions, the storage period is 6 months from the date of production. If there is no obvious change once exceed the storage period, the products can also be used normally after passing the inspection. * Packing specifications: 25kgs/bucket.
TS-3B 单组份聚氨酯防水涂料.png

法律声明

法律声明法律声明法律声明法律声明法律声明法律声明法律声明
x

隐私保护

隐私保护隐私保护隐私保护隐私保护隐私保护隐私保护隐私保护
x
x