管家婆22422论坛
logo.jpg 管家婆22422论坛
EN 中文

24 hours Hotline

400-6352-668

管家婆22422论坛
管家婆22422论坛

TS-8A Nano- PU Transparent Waterproof Latex for exterior Wall

Product overview

TS-8A Nano- PU Transparent Waterproof Latex for exterior is a new and high technology product for exterior wall leakage. By Nano technology, PU is modified to make out high performance emulsion waterproof latex for exterior wall. The product is non-toxic, tasteless and pollution-free. It is a green environmental product. It is transparent after coating, and keeps the original appearance of the building.

Order Hotline:400-6352-668

Advantages

* Water based latex, health and environmental products, good waterproof effect, reassuring use.

* Can be cold construction, simple operation, convenient and safe.

* High elasticity, good crack resistance, high bond strength, UV resistance, heat insulation, good weather resistance.

* Dry, colorless and transparent after film formation.

Application Range

* Anti-leakage treatment of exterior Wall of New and Old buildings; Repair of damaged surface for exterior wall with complex materials such as ceramic tile, stone and water brush stone of old buildings.

 

Key points of construction

* First clean the base surface to no oil stain, to achieve a solid level, no crisp, sand, skin, and other phenomena, cracks should be repaired first

* The water content of the test base need to be 40%, which can be brushed, rolled and sprayed, dilute the waterproof latex with water according proportion, use brush to paint the first time, if it's tile or stone surface, use brush carefully to hook the seam, the gap in the seam can be filled with permeable crystalline waterproof paint add water to fill it in the form of paste.

* Whole respray or roll brush second, third time.

* When many times coating, need to wait for previous film is dry, then going on the next coating. The long-term soaking area must be completely dry after the coating then can store water, the total drying time is 48 hours, the wet environment drying time will be longer.

 

Storage & Packaging

* This product is non-toxic, non-corrosive, non-flammable and explosive, can be transported as general goods. Avoid sun and rain, and prevent collisions.

* The product should be stored in a cool and ventilated place with a storage temperature of 5-40.

* Under normal storage and transportation conditions, the storage period is at least 18 months from the date of production. If there is no obvious change once exceed the storage period, the products can also be used normally after passing the inspection.

* Packing specifications: 1kg/bottle, 4kgs/bucket, 18kgs/bucket

法律声明

法律声明法律声明法律声明法律声明法律声明法律声明法律声明
x

隐私保护

隐私保护隐私保护隐私保护隐私保护隐私保护隐私保护隐私保护
x
x