Advantages

* It can be constructed on complex base surface to form an integral non seaming waterproofing film.
* Meet the requirements of environmental protection
* The product has stable performance, aging resistance, high and low temperature resistance and UV resistance.
* Single component no need to be mixed and easy to operate

Application Range

* Waterproofing of floor & internal / external wall of underground buildings.
* Waterproofing of Subway, tunnel, pipe gallery, well pit, pool, gutter, bathroom etc.
* Waterproofing of expansion joint, construction joint, deformation joint.
* Waterproofing of flat roofs, sloping roofs and planted roofs of concrete structures.

Executive Standard GB/T 19250-2013

Key points of construction

* The base surface should be clean, dry and crack should be repaired first.
* Scraping with a rubber scraper, the thickness of the coating should be uniform, no leakage, no delamination, etc.
* the construction is divided into 2-3 times,coating film is generally 1.5-2.0mm. When the previous coating is dry, can going on the next construction.
* The construction temperature range is 5-40℃, avoid the rain before coating film is dry.

Storage & Packaging

* When storage and transportation, different products need to be classified. Prevent approaching fire sources, avoid sun and rain, and prevent collisions.
* The product should be stored in a cool and ventilated place with a storage temperature of 5-40℃.
* Under normal storage and transportation conditions, the storage period is 6 months from the date of production. If there is no obvious change once exceed the storage period, the products can also be used normally after passing the inspection.
* Packing specifications: 10kgs/bucket, 25kgs/bucket.