With the continuous improvement of people's awareness of environmental protection, it is not only required that the wall coating be waterborne, but also that the floor decoration system be gradually waterborne to reduce the negative impact on the environment.In order to overcome this technical problem thoroughly, Taishi Coating Research Center has developed a waterborne epoxy floor coating system with excellent environmental protection, solvent resistance and high wear resistance by using advanced technology, special epoxy resin and special water curing agent, combined with special processing technology and emulsification technology. The waterproof and air permeability function of the system greatly improves the applicability of the system to the wet base. It is an ideal choice for all places where the epoxy floor coating system needs to be brushed because of the requirement of high cleanliness and no waterproof layer.
Application Range
The floor of garment, tobacco, food and other industrial plants;
There are water vapor, seepage, damp ground below the first floor (including basement), such as supermarkets, parking lots, canteens, restaurants, warehouses and other special places.
Product performance
Good wear resistance and hardness.
Environmental protection, dust-proof and mildew proof.
Seamless, easy to clean.
Water resistance, oil resistance, acid and alkali resistance and other general chemical corrosion.
Technical standard
Inspection items | Index value | |
State in Container | After mixing, there is no hard block，in a uniform state | |
Coating appearance | Flatness, no brush marks, wrinkles, pinholes, bubbles and other defects. | |
drying time(H25℃) | Surface dry | ≤8 |
Actual dry | ≤48 | |
Pencil hardness/H | ≥3 | |
Adhesion/Class | ≤1 | |
Impact resistance,Ø50mm, 500g steel ball, height 100m | No cracks, peeling off of the coating | |
Wear resistance(750g/500r)/g | ≤0.0060 | |
Skid resistance | ≥0.5 | |
| Water resistanceNo blistering, no peeling, allowed slight discoloration, restored after 2h Chemical resistance15% Na OH solution 72hNo blistering, no peeling, allowed slight discoloration10% HCL solution 72hNo blistering, no peeling, allowed slight discoloration120% Solvent gasoline 72hNo blistering, no peeling, allowed slight discoloration | No blistering, no peeling, allowed slight discoloration,restored after 2h.No blistering, no peeling, allowed slight discolorationNo blistering, no peeling, allowed slight discolorationNo blistering, no peeling, allowed slight discoloration | |
System characteristic
Surface morphology: solid color, bright light, matte light
Overall thickness: 1-3 mm.
General service life is 5-10 years
Construction profile
Water-borne epoxy surface layer
Water-borne putty layer
Water-borne mid-coated mortar layer
Water-borne primer layer
Basic ground
Construction technology
Process name | Specific practices and requirements | Reference dosage |
Primer layer | 1:Use epoxy water-borne primer, mix the main paint and curing agent proportionally, mix evenly. 2:Roll the coating with a roller to be uniform, no leakage. | 0.15-0.2kg/㎡ |
Mortar layer | 1:Use epoxy water-borne primer, mix the main paint and curing agent proportionally and add 40-150 mesh quartz sand to mix evenly. 2:Scrape 1-3 times with batch knife 3:After solidification, grind the defect such as knife marks and clean them up. | 0.6kg/㎡/mm |
Putty layer | 1: Use epoxy water-borne medium paint, mix the main paint and curing agent proportionally and add appropriate fillers (such as quartz powder, talc powder) to mix evenly. 2: Scrape 1-2 times with batches of knives, with emphasis on filling holes in the ground. 3: After solidification, polish the knife marks and other defects, and clean them with vacuum cleaner, chicken feather duster, broom, etc. | 0.2-0.3kg/㎡ |
Surface layer | 1:Use epoxy water-borne surface paint, mix the main paint and curing agent proportionally,mix evenly,add water to suitable construction viscosity 2:Dip the paint on the prepared drum and roll it evenly. It is required that the coating be uniform and leak-free. Roll it twice or spray 1-2 times. | 0.25-0.3kg/㎡ |
24 hours Hotline