TSD207 micro-bead anti-skid floor paint is a kind of bi-component high performance thin-coated epoxy floor paint, which is composed of epoxy resin, modified amine curing agent and imported spherical grave filler. Because of the stress concentration of the spherical glume, filling in the material can overcome the appearance of destructive cracks. At the same time, the spherical surface is more conducive to the uniform transmission of external forces to the surrounding matrix, thus improving the mechanical properties of the material, greatly improving its wear resistance, and has a very good anti-skid effect.
Application Range
Supermarket, building hall, warehouse, automobile exhibition hall, automobile repair shop, parking lot and other special places with anti-skid requirements.
Areas requiring high mechanical properties, the ground with a certain impact force, such as the machinery, electronics, electrical appliances, instrumentation, medicine, textiles, clothing, food, tobacco and other enterprise factories.
Product performance
The surface particles have uniform fineness, small fluctuation, high resistance and good anti-skid performance.
Reasonable structure, smooth, comfortable, no vibration, low noise, beautiful and slippery
Compression resistance, wear resistance, impact resistance and long service life
It has strong bond with the base layer, seamless surface and is not easy to peel off or crack.
Good drainage performance, no pollution, reduce or even eliminate splashes and water film, driving safety in rainy days.
Technical standard
Inspection items | Index value | ||
State in Container | After mixing, there is no hard block，in a uniform state | ||
Coating appearance | Flatness, no brush marks, wrinkles, pinholes, bubbles and other defects. | ||
Drying time(H25℃) | Surface dry | ≤4 | |
Actual dry | ≤24 | ||
Pencil hardness/H | ≥3 | ||
Adhesion/Class | ≤1 | ||
Skid resistance | ≥0.5 | ||
Impact resistance,Ø50mm, 500g steel ball, height 100m | No cracks, peeling off of the coating | ||
Wear resistance(750g/500r)/g | ≤0.0030 | ||
Tensile bond strength 7d standard condition/M Pa | ≥0.5 | ||
Water resistance | No blistering, no peeling, allowed slight discoloration, restored after 2h. | ||
Chemical resistance | 15% Na OH solution 72h | No blistering, no peeling, allowed slight discoloration
| |
10% HCL solution 72h | No blistering, no peeling, allowed slight discoloration | ||
120% Solvent gasoline 72h | No blistering, no peeling, allowed slight discoloration
| ||
System characteristic
Overall thickness: 1-5 mm.
The service life is 8-10 years.
No need to add sand on site
Construction profile
1 time anti-skid micro-bead surface layer
1 time common surface layer
2 times putty layer
1 time medium-coated mortar layer
1 time primer layer
Basic ground
Construction technology
Process name | Specific practices and requirements | Reference dosage |
Primer layer | Mix the material proportionally and mix evenly with agitator. Use professional drum to coat evenly and without omission. | 0.15-0.2kg/㎡ |
Mortar layer | Mix the paint and curing agent evenly according to the prescribed proportion (weight ratio), slowly add the appropriate amount of quartz sand, use a professional flat knife for batch scraping.
| 0.7kg/㎡/mm |
Putty layer | After mixing the paint and curing agent in the prescribed proportion (weight ratio) and mixing evenly, add appropriate amount of quartz sand slowly, and scrape it in batches with a flat knife in a limited construction time. | 0.2-0.3kg/㎡ |
Surface layer | 1:Use epoxy surface paint , mix the main paint and curing agent proportionally,mix evenly. 2:Dip the paint on the prepared drum and roll it evenly. It is required that the coating be uniform and leak-free. Roll it twice or spray 1-2 times.
| 0.25-0.3kg/㎡ |
Micro-bead anti-skid surface layer | After the putty layer is solidified, the main material of the anti-skid micro-bead topcoat is stirred evenly, and then the curing agent is added into the paint barrel to mix evenly. After that, it is evenly brushed once with a professional drum to achieve uniform surface particle fineness.
| 0.1kg/㎡ |
24 hours Hotline