管家婆22422论坛
logo.jpg 管家婆22422论坛
EN 中文

24 hours Hotline

400-6352-668

管家婆22422论坛
管家婆22422论坛

TS-401 Leakage Stopper King

TS-401 is a special waterproof and leak-stopping material with waterproof, fast leak-stopping, bonding and micro-expansion, which is made of special cement and various additives.

Order Hotline:400-6352-668

Product characteristics 

Fast solidification, instantaneous water stop, high strength, micro expansion, strong bonding, high impermeability;

It combines with the matrix to form a whole and is not easy to aging.

The utility model is simple to use and can be used on the water front or back surface to achieve the effect of leak plugging and waterproofing.

 

Application range

Seepage plugging of basement, toilet, pool, tunnel culvert, reservoir dam and roof. Emergency repair of various pressure pipes, emergency installation of mechanical equipment to plug leakage.

 

Usage method: 

1. Leak-stopping material:water = 1:0.25 is kneaded together to form a ball. In order to ensure the quick setting property of the material, when the ambient temperature is below 10, it is regulated by warm water.

2. Moisture Maintenance: Moisture Maintenance to prevent powdering immediately after hardening of the coating. Maintenance methods are spraying water, covering wet cloth, etc. The first maintenance should be careful not to damage the coating, a total of 2 to 3 days, wet place can be maintained naturally.

 

Performance parameter

Reference Dosage: According to the actual site dosage

Initial setting time: ≤5 minutes

Final setting time: ≤10 minutes

Construction temperature: +5~+35

Packaging: 1kg/package, 5kgs/package

Implementation standard: GB 23440-2009, specific indicators see technical parameters.

 

No

Project

Performance index comparison

Retarding type(I)

Quick setting type(II)

1

setting time

Initial setting /min

≥10

≥5

Final setting /min

≤360

≤10

2

Compressive strength/Mpa

1h

-

≥4.5

3rd

≥13.0

≥15.0

3

Flexural strength/Mpa

1h

-

≥1.5

3rd

≥3.0

≥4.0

4

Impermeability Pressure of Coating/Mpa(7d)

≥4.0

-

5

Impermeability pressure of specimens/Mpa(7d)

≥1.5

6

Bond strength/Mpa(7d)

≥0.6

7

Heat resistance(100,5h)

No cracking, peeling, shedding

8

Freeze-thaw cycle(20times)

No cracking, peeling, shedding

 

Transportation& Storage 

Unopened products are stored in dry, cool and ventilated places.

Under normal storage and transportation conditions, the storage period is 12 months from the date of production.

 

Attention

This product is easy to absorb water and moisture. It needs to be used up once after opening.

This product should be constructed in the environment of 5 - 35.

This product will give off a lot of heat when it is cured, so attention should be paid to preventing scald.

This product will be irritating if it splashes into the eyes. Please rinse it with clean water in time.

TS-401 堵漏王_1kg.jpg

法律声明

法律声明法律声明法律声明法律声明法律声明法律声明法律声明
x

隐私保护

隐私保护隐私保护隐私保护隐私保护隐私保护隐私保护隐私保护
x
x