TS-405 external wall transparent waterproof adhesive is a high-tech product for the leakage of external walls. It is made of high-performance latex exterior wall waterproof adhesive through nano technology. The product is non-toxic, tasteless and pollution-free. It is a green environmental protection product, transparent with conjunctiva after waterproof coating, keeps the original appearance of the building, has good impervious and waterproof properties, and has excellent aging resistance.
Product characteristics
Water-borne latex is a healthy environmental protection product with good waterproofing effect and safer use.
Cold construction, simple operation, convenience, safety, good water resistance;
The film has high elasticity, good crack resistance, high bonding strength, excellent anti-ultraviolet, heat insulation and weather resistance; the film is colorless and transparent after drying.
Application range
Leak-proof treatment of exterior wall surface of various new buildings; repair of damaged exterior wall surface of complex materials such as old building tile, stone, water brush stone, etc.
Usage method:
1. Base surface treatment: first, clean the construction base surface to no oil pollution, achieve solid and smooth, without crispness, sand, peeling and other phenomena, cracks should be repaired and smoothed first;
2. Brushing: It is advisable to test the moisture content of the base surface about 40%. The construction can be carried out by brushing, rolling and spraying methods. The waterproof collagen liquid and water can be diluted proportionally or the first base coating can be painted by brushing. If the ceramic tile or stone surface is finished by brushing carefully, the gap in the seam can be filled by infiltration crystalline waterproof coating and water into paste.
3. Repeated brushing: spraying or rolling the whole again for the second and third time. During multiple times of construction, before the first coating is dry, the next coating can be carried out. After long-term immersion, the film must be completely dried before water can be stored. The complete drying time is 48 hours, and the humid environment should be prolonged appropriately.
Performance parameter
Reference Dosage: 0.2-0.5kg/㎡
Initial setting time: ≤2hours
Final setting time: ≤24 hours
Construction temperature: +5℃~+35℃
Packaging: 1kg/bottle 4.5kgs/bucket 16kgs/bucket
Implementation standard: Enterprise standard, specific indicators see technical parameters.
No | Project | Index |
1 | Appearance | transparent viscous liquid |
2 | Surface dry time | 1h |
3 | Fracture elongation | ≥400% |
4 | Tensile strength | ≥0.8Mpa |
5 | Low temperature flexibility | -20℃ no crack |
6 | Heat resistance | 80℃ 5h no change |
7 | Cold-hot cycle | No cracking, discoloration, gloss loss and peeling of coatings |
8 | Impermeability | 0.3 Mpa, in 30min no leakage |
9 | Bond strength | ≥1.0Mpa |
Transportation& Storage
This product is non-flammable and explosive material. It can be transported according to general cargo. It should be sunscreen, freeze-proof, rain-proof, extrusion and collision-proof in transportation, and keep the package intact.
The product should be sealed in a ventilated, dry and cool place. The storage temperature is +5℃~+35℃.
Under normal storage and transportation conditions, the storage period shall be at least 12 months from the date of production.
Attention
After the waterproof layer is completely dry, the construction can be carried out.
This material should be constructed in the environment of 5 - 35 C, and it is not suitable to be constructed outdoors in rainy weather.
If this product splashes into the eyes, it will be irritating. It should be washed with clean water in time.
24 hours Hotline