Product performance 

It is specially designed for the polished bricks and vitrified bricks.

High bonding strength and durability;

Convenient construction and easy to use.

Application range

Applicable to low water absorption vitrified brick, antique brick, cultural stone, polished brick, artificial stone, natural marble, chinaware and other wall; anti-cracking and yellowing of exterior paint; old wall renovation waterproof and anti-shedding, wall roughening and reinforcement.

Usage method 

1. Single component use: use a brush to coat the adhesive evenly on the back of polished bricks, not to leak, natural air-drying, reserve, back glue construction environment temperature of 5-40℃;

2. Use of mixed cement: Mix the adhesive and cement in a ratio of 1:2 with an electric mixer. Store them for 3 minutes and reserve them. The mixed materials need to be used up within 2 hours.

Transportation& Storage 

This product is non-flammable and explosive material. It can be transported according to general cargo. It should be sunscreen, freeze-proof, rain-proof, extrusion and collision-proof in transportation, and keep the package intact.

The product should be sealed in a ventilated, dry and cool place. The storage temperature is +5℃~+40℃.

Under normal storage and transportation conditions, the storage period is12 months from the date of production.

Performance parameter 

Reference Dosage: 0.5-1.0kg/㎡

Initial setting time: ≤20min

Final setting time: ≤48hours

Construction temperature: +5℃~+40℃

Packaging: 20kgs/package

Implementation standard: JC/T 547-2005, specific indicators see technical parameters.

Attention

It is not suitable to construct in rainy days. Before the mortar is completely dried after construction (about 24 hours), the phenomenon of pan-alkali may occur if it is drenched by rain water.

This product contains cement, alkaline reaction occurs in water. Eyes and skin should be properly protected. If enter eyes carelessly, please see a doctor in time.