TS-204 two-in-one waterproof decorative texture mortar is made of selected natural minerals and can be directly constructed on ceramic tile and cement base surface. The surface of the texture coating is slurry and full, and the sand grains are arranged evenly and compactly. Through the three-dimensional natural texture, the aesthetic effect of the building is highlighted.
Product characteristics 产品特点
The coating is tough, brightly coloured and resistant to scrubbing.
Integration of waterproofing and decoration functions; one-time construction and shaping, efficient and fast;
Strong waterproof, ageing resistance, anti-discoloration.
Scope of application 适用范围
I is suitable for waterproofing decoration of exterior walls of old and new buildings. It can be directly used for leakage maintenance and renovation of exterior walls of various substrates such as ceramic tile surface and wall paint surface.
II. It is especially suitable for interior and exterior wall decoration of high-grade residential buildings, high-grade villas and hotels.
Usage method 使用方法
1. Base surface requirements: dry, firm, smooth, dust-free, greasy, saline and alkali-free foreign bodies;
2. Mixing: According to the proportion of powder: liquid = 1:1, pour the paint into the container, then slowly pour the powder into the liquid, while fully mixing to no particles, uniform paste can be used;
3. Construction methods: spraying, brushing and rolling.
Performance parameter 性能参数
Reference Dosage:1.5-3.5kgs/㎡
Initial setting time: ≤4hours
Final setting time: ≤48hours
Construction temperature: +5℃~+35℃
Packaging: 20kgs/set
Implementation standard: JG/T24-2000, specific indicators see technical parameters.
Project | Technical standard | |
State in container | No agglomeration and uniform state after stirring | |
Constructability | No difficulty in spraying | |
Low temperature storage stability of coatings | After three tests, no caking, coagulation and composition changes. | |
Thermal storage stability of coatings | No caking, mildew, coagulation and composition changes after 1 month test | |
Crack resistance of initial drying | No crack | |
Surface drying/h | ≤4 | |
Water resistance | 96h coating has no bulging, cracking and peeling, and allows slight color change compared with the non-immersed part. | |
Alkali resistance | 96h coating has no bulging, cracking and peeling, and allows slight color change compared with the non-immersed part. | |
Impact resistance | No crack, spalling and obvious deformation of coating | |
Bond strength | Std condition | ≥0.7 |
After immersion | ≥0.5 | |
Artificial aging resistance | 500h coating without bulging, cracking, peeling, powdering grade 0, discoloration≤ grade 1 |
Transportation & storage运输储存
This product is non-flammable and explosive material. It can be transported according to general cargo. It should be sunscreen, freeze-proof, rain-proof, extrusion and collision-proof in transportation, and keep the package intact.
The product should be ventilated, dried and prevented from direct sunshine during storage. The storage temperature should be between 5 and 35℃.
Under normal storage and transportation conditions, the storage period is 12 months from the date of production.
Attention注意事项
This product should be constructed in the environment of 5 - 35℃. It is not suitable to construct outdoors in rainy weather.
If this product splashes into the eyes, it will be irritating. It should be rinsed with clean water in time.