TS-901 "easy-to-use" reactive self-adhesive waterproofing membrane is based on high-quality asphalt, synthetic rubber, tackifier and anti-aging agent,through optimizing formulation, the durable reactive self-adhesive high sealant with super high bonding performance is prepared, is a self-adhesive membrane with strong cross-laminated film as surface material or tire base.
Product characteristics
Actively combined with structural concrete, the bond is firm and permanent.
Active healing of damaged pore diameter less than 2 mm, super self-healing ability;
Active locking of leakage points eliminates the source of water channeling and facilitates maintenance.
Actively absorb and dissolve structural stress, resist structural deformation and crack, and ensure the durability and effectiveness of waterproof layer.
Active self-protection capability, strong pressure film layer and durable reactive viscous self-adhesive sealant protect each other from damage.
Product usage
Basement, roof waterproofing, planting greening and waterproofing of basement roof and roof, metro, tunnel and water pool of industrial and civil buildings; waterproofing works with corrosive and large deformed parts, requiring higher requirements for waterproofing , such as sugar factory, grain depot, electronic factory, pharmacy workshop or warehouse.
Executive standard
"Self-adhesive polymer modified asphalt waterproofing membrane" GB 23441-2009 PY, specific indicators see technical parameters.
No | Project | Index | |||||||||
PY type I | PY type II | ||||||||||
1 |
Soluble matter content g/㎡ ≥ | 2.0mm | 1300 | -- | |||||||
3.0mm | 2100 | ||||||||||
4.0mm | 2900 | ||||||||||
2 |
Tensile capacity |
Tensile force(N/50mm) ≥ | 2.0 | 350 | -- | ||||||
3.0 | 450 | 600 | |||||||||
4.0 | 450 | 800 | |||||||||
Elongation at maximum tensile force/% ≥ | 30 | 40 | |||||||||
3 | Heat resistance | 70℃,2hous no sliding, flowing, dripping | |||||||||
4 | Low temperature flexibility/℃ | -20 | -30 | ||||||||
No crack | |||||||||||
5 | Water impermeability | 0.3Mpa, 120min,impervious | |||||||||
6 |
Peel strength N/mm ≥ | Membrane and membrane | 1 | ||||||||
Membrane and Al plate | 1.5 | ||||||||||
7 | Water tightness of nail rod | pass | |||||||||
8 | Oil permeability/pcs ≤ | 2 | |||||||||
9 | Continuous viscosity/min ≥ | 15 | |||||||||
10 |
Thermal aging 70℃/168h | Elongation at maximum tensile force/% ≥ | 30 | 60 | |||||||
Low temperature flexibility/℃ | -18 | -28 | |||||||||
Peel strength membrane and Al plate N/mm ≥ | No crack | ||||||||||
Dimensional stability/% ≤ | 1.5 | 1 | |||||||||
11 | Repeeling Strength of Self-adhesive Asphalt/(N/mm) ≥ | 1.5 | |||||||||
Product specification
1.5 mm thickness 20m/coil, 2.0 mm thickness 15m/coil
24 hours Hotline